Dräger respiratory mask + valve X-plore® 1730 FFP3, single mask - 1 St

The Dräger X-plore® 1730 V is the FFP3 variant including exhalation valve, the X-plore® 1700+ series. The mask combines breathing comfort and minimal breathing resistance. The filter performance is verified according to the European standard EN149:2001 + A1:2009.

Characteristics of the breathing mask

The mask is equipped with the Dräger CoolSAFE+™ filter material. This reduces breathing resistance to a minimum and enables easy and comfortable breathing even over a long period of time. At the same time, however, the material has excellent filtering performance against coarse and fine particles.

The slight breathing resistance is further supported by the CoolMAX™ exhalation valve. This also directs the warm, moist breathing air downwards out of the mask, so that there is no build-up of heat under the mask and the glasses or eye protection that may be worn does not fog up.

The mask also has a high tight fit without leakage, since the nose pad inside and the nose clip outside ensure that the nose is securely fixed in the critical nose area. The soft inner material adapts well to the shape of the face. This ensures a comfortable fit and a high level of comfort even with a longer wearing time.

The mask is also equipped with the VarioFLEX ™ head harness. This ensures that the mask is easy to put on and take off without leaving pressure marks. Thanks to the EasyStop technology, this can also be adjusted individually.

Overview of properties:

• FFP3 according to EN149:2001 + A1:2009
• Filter performance > 94%
• padded nose piece
• Breathing resistance approx. 68% below the specified norm
• individually hygienically packed
• Made in Sweden
• Expires: February 2024

Storage of the mask

Store the mask in a cool, dry place. Avoid direct sunlight during storage. The storage temperature must not exceed the limits of -20°C and + 40°C. The air humidity should not be more than 80%.